Hitachi Microlok II, Installation, Operation And Troubleshooting Manual

Page: 18 / 52

Microlok II
®
Serial-to-Ethernet Converter (SEC)
Copyright 2019 SM6800O Rev. 1, March 2019 3-4
SERIAL CABLE
ETHERNET
CROSSOVER CABLE
STANDARD
ETHERNET CABLE
MICROLOK II
POWER
SUPPLY
PC
ETHERNET NETWORK
SERIAL-TO-ETHERNET
CONVERTER
+
_
Figure 3-3 - SEC Wired to the Power Source, Microlok II, and PC
3.5
14B
Configuring Internet Explorer to Access the SEC Configuration Screens
To be able to use Internet Explorer to access the configuration functions of the SEC, you may
need to do one or both of the following:
• Specify the IP address range used by the SEC in Internet Explorer's Settings
• Delete the Temporary Internet Files saved by Internet Explorer
This section describes each of these procedures.
3.5.1
22B
Checking Internet Explorer
You may need to configure your Internet Explorer settings to allow the browser to access the
IP address range used by the SEC. The address range is specified by 169.254.*. To check
Internet Explorer and to configure it, if necessary, do the following:
1. In the Internet Explorer Tools option click on Internet Options (
X
Figure 3-4
X
).