Hitachi Microlok II Installation, Operation And Troubleshooting Manual Download Page 3

Page: 3 / 52

Microlok II

Serial-to-Ethernet Converter (SEC)

Proprietary Notice

This document and its contents are the property of Hitachi Rail STS, formerly known as

Ansaldo STS, and Union Switch & Signal Inc. hereinafter STS). This document has been

furnished to you on the following conditions: no right or license under any patents or any other

proprietary right in respect of this document or its content is given or waived in supplying this

document. This document or its content are not to be used or treated in any manner

inconsistent with the rights of STS, or to its detriment, and are not to be copied, reproduced,

disclosed to others, or disposed of except with the prior written consent of STS.

Important Notice

STS constantly strives to improve our products and keep our customers apprised of changes in

technology. Following the recommendations contained in the attached service manual will

provide our customers with optimum operational reliability. The data contained herein purports

solely to describe the product, and does not create any warranties.

Within the scope of the attached manual, it is impossible to take into account every eventuality

that may arise with technical equipment in service. Please consult your local STS sales

representative in the event of any irregularities with our product.

We expressly disclaim liability resulting from any improper handling or use of our equipment,

even if these instructions contain no specific indication in this respect. We strongly recommend

that only approved STS spare parts are used as replacements.

Summary of Contents for Microlok II















































Search results

Summary of Contents for Microlok II

Reviews:

Related manuals for Microlok II

Brands by name

Popular brands

Hitachi Microlok II, Installation, Operation And Troubleshooting Manual

Search results

Summary of Contents for Microlok II

Reviews:

Related manuals for Microlok II

Brands by name

Popular brands