Hitachi HV-D30 Operation Manual Download Page 2 | Manualshive

Page: 2 / 65

background image

IMPORTANT SAFETY INSTRUCTIONS

1. Read Instructions

All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future reference.

3. Heed Warnings

All warnings on the product and the operating instructions should be adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments

Do not use attachments not recommended by the product manufacturer as they may
cause hazards.

7. Water and Moisture

Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should follow the
manufacturer's instructions, and should use a mounting accessory recommended by the
manufacturer.

9. Moving

A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart
combination to overturn.

10. Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not
be blocked or covered.
The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.

A

«
1
2
3
4
...
»

Summary of Contents for HV-D30


































































Reviews:

No comments

Related manuals for HV-D30

Brand: wanscam Pages: 19

Brand: Technaxx Pages: 17

Brand: Zone defense Pages: 8

Brand: Godox Pages: 16

Brand: COP-USA Pages: 34

Brand: Kome Pages: 18

Brand: 4MP Pages: 18

Brand: Center Pages: 2

Brand: D-Link Pages: 72

Brand: Larson Electronics Pages: 6

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 26

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands