FUNCTION select button
Camera setting menu display button.
[5 UP, LEFT, DOWN and RIGHT buttons
Menu screen operating buttons.
SCENE FILE buttons
Select camera application files and stores scene file data. Four application files can
be used as scene files.
Scene files:
To shoot several scenes with different shooting conditions, it is needed to change
settings suitable for each scene. To reduce such troublesome operations, various
shooting conditions can be memorized previously to scene files, and the conditions
most suitable for a scene can be read and set. The RC-Z3 is provided with four files,
and four differnt shooting conditions can be memorized.
(1) File selection
Press the following buttons to change the camera and RC-Z3 settings.
PRESET:: Produces the standard setting mode
SCENE FILE 1:: FILE-1 (scene file 1) setting mode
SCENE FILE 2:: FILE-2 setting mode
SCENE FILE 3:: FILE-3 setting mode
SCENE FILE 4:: FILE-4 setting mode
Note: The pressed SCENE FILE button lights, then flashes when the application
file data are changed. Flashing continues if the data are changed or the
original value is returned. When again pressed, the button lights steadily.
(2) Setting data store
The Store function is used to save the application file item data. The common file
item data are saved during adjustment and operation.
Store operation
After entering the settings with the menu screen and RC-Z3, press the STORE
button (the STORE button flashes). Then press the desired SCENE FILE button
for storing the settings (STORE button extinguishes).
Store release
While the STORE button is flashing, again press the button. The STORE button
extinguishes and the mode is released.
File data copy
Press the Preset or SCENE FILE button of the source, then press the STORE
button (flashes). Next press the SCENE FILE button of the destination file.
The settings are copied and stored in the designated file.
Store operation notes: :
1. After adjustment and operation with the RC-Z3, neglecting the Store operation
before pressing a file button loses the adjustment and setting item data. The
output is the designated file data prior to adjustment and operation.
41
