8) Y SAT: Increase yellow color level
9) G SAT: Increase green color level
10) C SAT: Increase cyan color level
11) B SAT: Increase blue color level
12) M SAT: Increase magenta color level
The above items can be set in the range of -32 to +31. Respectively press the R button
to increase and the L button to decrease the color level. Each item can be set to 0 by
simultaneously pressing the L and R buttons for about 2 seconds.
13) Initialize : Returns level menu settings to preset values. Simultaneously press L
and R for about 2 seconds.
14) File select : Selects scene files 1 - 4 and preset.
10. GAMMA
Menu for setting the gamma parameters. If dark component contrast is inadequate,
adjusting the gamma parameters allows detailed adjustment of the Sub-menu 2
Contrast (Off, Normal, High).
1) GAMMA TABLE : Sets gamma rising slope.
Low
: Dark component gradation reduced.
Standard : Standard setting
High
: Dark component gradation increased.
2) TOTAL GAMMA : Sets total (R, G and B) gamma point
Setting range is from -128 to 127. Press R to raise and L to lower RGB video signal
gamma point. Simultaneously press the L and R buttons for about 2 seconds to set
to 0.
3) R ADJUST : Sets red gamma point.
Setting range is from -128 to 127. Press R to raise and L to lower red video signal
gamma point. Simultaneously press the L and R buttons for about 2 seconds to set
to 0.
4) B ADJUST : Sets blue gamma point.
Setting range is from -128 to 127. Press R to raise and L to lower blue video signal
gamma point. Simultaneously press the L and R buttons for about 2 seconds to set
to 0.
5) Initialize : Returns level menu settings to preset values. Simultaneously press L
and R for about 2 seconds.
6) File select : Selects scene files 1 - 4 and preset.
24
