background image

59

Interpreting symbols on LCD s

c

reen when re

c

ording with the s

c

reen 

fa

c

ing the same dire

c

tion as the lens

Note

:

If the LCD screen is set facing the same direction as the lens, the LCD screen will display a mirror image (left and 
right reversed).

If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewfinder.

Although you can switch to the manual focus, exposure and on-screen display modes even during recording with 
LCD screen facing the same direction as lens, they will not appear on the screen.

When the LCD monitor is opened and turned 180º with the Programme AE set to Low Light, the monitor screen 
will light white (see page 69).

S

c

reen 

display 

symbol

Des

c

ription

/

A write-protected disc is loaded.

A locked card is loaded.

)

An unusable card is loaded.

%

An attempt to record a still is being made with a DVD-RW/DVD-
R/+RW disc used.

An unusable disc is loaded.

7

During recording (lights in red).

The remaining capacity on disc is approaching the limit 0 (blinks 
in red).

8

During recording pause (lights in green).

During focus lock (lights in purple).

The remaining capacity on disc or card is approaching the limit 0 
(blinks in red).

There is no remaining capacity on disc or card (blinks in green).

Summary of Contents for DZMV5000E














































































































































Reviews: