Hitachi DZMV5000E Instruction Manual Download Page 22

Page: 22 / 141

Basic

ion
Ma

ual

Battery

CHARGING BATTERY

Connect the mains lead to AC adapter/
charger.

Plug the mains lead into AC outlet.

Attach the battery to AC adapter/charger.

Note

When charging a battery, unplug the DC power cord
from the DC output jack on AC adapter/charger.

●

Battery

harged status

ATTACHING BATTERY

Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.

Note

•

Make sure that the battery is in the correct orientation.

•

Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.

REMOVING BATTERY

While holding down the BATTERY EJECT
button, slide the battery upward to remove it.

Note

•

For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.

•

Be careful not to drop the removed battery.

Charge status

CHARGE indi

ator

During charge

Lit

Charge complete

Goes out

Mains lead

AC adapter/charger

Battery

CHARGE indicator

DC output jack

To AC outlet
* The shape of plug

varies depending
on the model.

Terminal
side must be
down.

BATTERY EJECT button

Summary of Contents for DZMV5000E














































































































































Search results

Summary of Contents for DZMV5000E

Reviews:

Related manuals for DZMV5000E

Brands by name

Popular brands

Hitachi DZMV5000E, Instruction Manual

Search results

Summary of Contents for DZMV5000E

Reviews:

Related manuals for DZMV5000E

Brands by name

Popular brands