Hitachi DZMV5000E Instruction Manual Download Page 16

Page: 16 / 141

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP07PW):

Portable power supply for this DVD video
camera/recorder. Charge it before use.

AC adapter/

harger

(model DZ-ACS3 (E)):

Used to power the DVD video camera/
recorder from AC outlet, or charge battery.

DC power

ord:

When powering the DVD video camera/
recorder from household AC outlet, use
this cord to connect the DVD video
camera/recorder and AC adapter/charger.

Mains lead:

Connect between household AC outlet and
AC adapter/charger.

AV/S output

able:

Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or output video to another video
device.

Shoulder strap:

Attach to the DVD video camera/recorder
to hang it from shoulder.

Lens

ap and lens

ap string:

Attach the lens cap when not recording, to
protect the lens.

Single-sided

m DVD-R dis

To record videos (movies) on this DVD
video camera/recorder.

Dis

leaning

loth:

Always use this to clean discs.

Summary of Contents for DZMV5000E














































































































































Search results

Summary of Contents for DZMV5000E

Reviews:

Related manuals for DZMV5000E

Brands by name

Popular brands

Hitachi DZMV5000E, Instruction Manual

Search results

Summary of Contents for DZMV5000E

Reviews:

Related manuals for DZMV5000E

Brands by name

Popular brands