English
118
The following operations are not possible on the DVD video camera/
recorder while it is being connected to PC:
•
Camera operation using operation buttons on DVD video camera/recorder.
•
Ejection of disc using DISC EJECT button on DVD video camera/recorder.
•
Power off using power switch.
•
Do not use Explorer to operate any video files recorded on disc: Use the provided software. Do not
use the PC to delete any photos recorded on a DVD-RAM.
•
Disc and card cannot simultaneously be accessed.
A disc loaded in the DVD video camera/recorder can be ejected by operating the
PC.
•
The disc and SD memory card can be replaced even though the DVD video camera/recorder is
turned off or it is not connected.
●
When removing disc
[When using Windows]
Use Windows Explorer or My Computer to choose the drive icon of DVD video camera/recorder.
→
Right-click the mouse.
→
Choose “Eject”.
→
The cover of disc insertion block on DVD video camera/recorder will open.
Insert another disc and close the cover: The disc will be recognised.
[When using Macintosh]
Place the drive icon of this DVD video camera/recorder (displayed on desktop) in Trash Box: The
cover of disc insertion block on DVD video camera/recorder will open. Load another disc and
close the cover: The disc will be recognised.
●
When removing SD memory card
[When using Windows]
Make sure that the SD memory card is not being accessed by the PC software on PC, and that the
CARD ACCESS indicator on DVD video camera/recorder (see page 8) is not lit or blinking, and then
remove the SD memory card from DVD video camera/recorder.
The CARD ACCESS indicator may be lit or blinking for a while after a file in PC is written to the SD
memory card: Wait until the CARD ACCESS indicator goes out. It will sometimes take no less than a
few minutes.
[When using Macintosh]
Drag the removal drive icon (displayed on desktop) and place it in Trash Box. After making sure that
the icon disappears from desktop, remove the SD memory card from the card insertion slot of this
DVD video camera/recorder.
USING DISC IN DVD DRIVE BUILT INTO PC
If you have a PC with the drive conforming to the disc used, and the application software, you can
directly insert the disc into the drive to use it.
Whether a disc conforms to the DVD drive will depend on the DVD drive: Use a DVD drive that
conforms to each disc.
Finalised DVD-RW/DVD-R/+RW discs can be used with DVD-ROM drive (reading only).
The slot-in type drive of Macintosh is not compatible with an 8 cm disc: Be sure not to use the
drive, since a disc inserted by mistake cannot be removed.
