29
3. OPERATING PROCEDURE [How to Use the Digital Monitor]
3.4.3 Change of Pressure Setting
１
2
FUNC
STR
Pres.
setting 1
Press the button.
Press the button.
Change
values.
3.4.4 Change of Capacity Control Type
１
2
FUNC
STR
AUTO setting
Change
values.
(Initial value: 0)
Press the button.
Press the button.
Set AUTO OFF.
3.4.5 Restart for Instantaneous Power
Interruption
2
START
REMOTE
RUNNING MODE
AUTO START
POWER
LOAD
SHUTDOWN
STOP
UNLOAD STOP
③
②③
(1) IPI means that the power voltage drops to zero (0)
instantaneously.
(2) For the IPI time of less than 20 ms, the air compressor
continues to run.
(3) For the IPI time of more than the setting, the air
compressor judges it as a power failure; the air
compressor stops but does not restart automatically.
Press the
START
button to restart the air compressor.
IMPORTANT
Use the following procedure to change the pressure
setting of the capacity control system.
①
Switch the display from monitor mode to setting
mode (F mode).
②
Set
Pressure Setting 1
in F mode.
(
3.4.2
)
For operation procedure, refer to the various settings.
After entering setting values, be sure to press the
STORE
button and return to the monitor mode.
Make sure to press the
STORE
button to memorize
the setting value.
IMPORTANT
AUTO (automatic motor stop/restart function) can be
selected properly.
①
Switch the display from monitor mode to setting
mode (F mode).
②
Set 0 (valid) or 1(invalid) while the air compressor is
stopped.
Capacity control type
AUTO ON
AUTO OFF
F011
0: Valid
1: Invalid
Digital monitor display
0
.
A
Ｘ
X
0
.
U
Ｘ
X
After setting change, confirm the capacity control type
by checking the settings on the digital monitor
(
3.4.1
.
(
3.4.7
,
3.4.8
and
8.4
)
In item F018, pressure setting 1 and 2 can be switched.
①
This function is available for IPI between 20 ms and
the set value (F003: 1 to 5 sec).
②
When IPI occurs , the air compressor stops and the
START
light turns off.
③
After power recovers within F003 set condition, the
AUTO
light blinks and the
START
light turns ON
(glowing) to inform that the air compressor is
waiting for restarting from IPI.
④
The air compressor restarts 15 seconds after power
recovers.
IPI is standard function. IPI can be canceled by F002.
refer to the page 27.
