Hitachi DS240, Service Manual

Page: 60 / 174

I
NSTALLING THE
H
ARDWARE
I
NSTALLING A
PCI
E
R
ISER
A
SSEMBLY
2-18
6. Press the latch plunger on the mid-brace to the secured position to lock the GPU
card’s mount bracket.
Figure 2-23. Release the latch plunger
7.
Install the mainboard sled. See Installing a Mainboard Sled on page 2-13.
8.
Replace the system in the rack frame and connect to
the
power source.
Removing a PCIe Card
1.
Remove the PCIe riser assembly from the system. See Removing a PCIe Riser
Assembly on page 2-14.
2.
Rotate the latch securing the PCIe card to the riser bracket to the open position.
Note:
Check the PCIe Card size before installing to ensure compatibility.
Latch Plunger
Latch Plunger
Latch Plunger
Secured Open