Hitachi DS240, Service Manual

Page: 147 / 174

BMC BMC F
IRMWARE
U
PDATE
5-6
5.2 BMC Firmware Update
This section provides guidelines on BMC firmware update process in Linux and Windows
systems.
Note:
In-band means user performs firmware update on the system which has installed
Windows/Linux operating system. Using the in-band update, the firmware pack-
age is readable in the platform system interface so that the user can execute
update script to perform firmware update.
Note:
Out-of-band (OOB) means the firmware update is performed remotely. User exe-
cute the firmware update which the firmware image and command will be deliv-
ered to BMC through network interface. BMC receive the command and image to
perform firmware update.
In-band and Out-of-band are two different ways to update BMC firmware.
Please be aware that the way to update BMC firmware through In-band YAFUFLASH tool
can’t be supported for preserving BMC configurations but other YAFUFLASH and BMC
WebUI through out-of-band ways can support for preserving BMC configurations.
Out-of-band (Offline) update (via YAFUFLASH tool)

Get the BMC firmware package named s7dv0350.zip.

Unzip package s7dv0350.zip to \tmp\s7dv0350 in Linux (or C:\s7dv0350 for Win-
dows operating system) and change directory into folder s7dv0350.

Setup environment: User needs to setup the environment under Linux Operating
System (Windows Operating System does not require to setup the environment):

Change the privilege for the files so that the files have the execute permission.
./chmod -R 755 .
Linux:

run "linux_oob.sh <BMC IP>” (default BMC static IP address = 192.168.0.120)
Windows:

Launch a cmd.exe console and change directory into the folder of C:\s7dv0350.

run "win_oob.bat <BMC IP>" (default BMC static IP address = 192.168.0.120)