Hitachi DS240, Service Manual

Page: 128 / 174

BIOS F
IRMWARE
U
PDATE
I
NSTRUCTIONS
4-23

Then, enter setup,
and
press <F9> to load
the
default and save before any test run.
x64 Windows environment
Follow the steps below to update both
the
BIOS and ME FW:

Power on the system and boot into
the
Windows OS.

Unzip the release package to the same folder in the HDD.

Launch
a
Command Prompt in the release package folder, or change to the folder
where the
release package
is
located.

Execute batch file “ BIOS_win64.cmd ” to update BIOS.

Execute batch file “ ME_win64.cmd ” to update ME FW.

After the update
is complete,
perform a DC cycle, the new BIOS/ME FW runs.

Then, enter setup,
and
press <F9> to load default and save before any test run.
For x64 Linux environment
Follow the steps shown as below to update both BIOS and ME FW:

Power on the system and boot into Linux OS.