BIOS
C
LEAR
P
ASSWORD
4-18
Clear Password
To clear
the
password by jumper, use the following steps:
1. Power down the system.
2. Locate the switch SW3 on the mainboard.
3. Adjust the PASSWD CLEAR DIP from off to on.
4.
Power on the system.
5.
Check
to verify that the
password is cleared.
6.
Power down the system.
7.
Adjust the PASSWD DIP from off to on.
8.
Power on the system.
9.
Set
the
new password.
Note:
Complementary Metal-Oxide-Semiconductor (CMOS) is a technology for con-
structing integrated circuits. CMOS technology is used in microprocessors, micro-
controllers, static RAM, and other digital logic ciruits. CMOS Clear Jumper would
provide “Clear the current setting stored in the NVRAM and restore BIOS setting to
Factory Default.”
Firmware Update Instructions
Note:
In-band means user performs FW update on the system which has installed DOS/
Windows/Linux operating system. Using the in-band update, the firmware pack-
age is readable in the platform system interface so that the user can execute
update script to perform firmware update.
SW1
SW3
SW1
SW1
BIT1: (Reserved)
BIT2: PASSWD CLEAR
Off (Open): Normal (Default)
On (Short): Password Clear
SW3
SW3
BIT1: CMOS CLEAR
Off (Open): Normal (Default)
On (Short): RTC Reset
BIT2: ME FW UPDATE
Off (Open): Normal (Default)
On (Short): ME Force Update
DIP Jumper Settings
Summary of Contents for DS240
Page 97: ...Rail Kit Assembly Chapter 3 ...
