2-66
（
5
）
Actual Run Timer setting
Press either the Enable or Disable button and make sure that the selected button is surrounded
with a red frame.
Then press the x button or the ADMIN tab to store the setting.
（
6
）
Date and time
Press the area of the desired item (Year, Month, Day, Hour, or Minute) ,and make sure that the pressed
area turns red. Then enter the date and time using on-screen keypad.
If you want to change the other items, press the area of the other items.
You can also turn the desired area to red by pressing the > button and < button.
If you do not want to change the other items, press the
Enter button on the on-screen keypad.
Example:
Year:2012
Month:March
Day:30th
Time:5:55pm
If you want to change the setting of the other items in the ADMIN screen, press the ADMIN tab.
Use this function to precisely set the current
time setting of the internal clock.
Set an exact date and time for RTC
operation.
Fig. 2-6-4 (4)
Setting at Time screen
<Actual Run Timer is enabled.>
When you press the Enable button,
the timer starts counting after reaching the
set speed.
<Actual Run Timer is not enabled.>
When you press the Disable button,
the timer starts counting immediately after
the start of operation.
2-6-4 Administrator (Admin) Functions
Fig. 2-6-4 (2)
Actual Run Timer Setting screen
Fig. 2-6-4 (3)
Setting at Time screen
Summary of Contents for CR21N
