Hitachi CR21N, Instruction Manual

Page: 21 / 112

2-6
The next page describes how to set run condition by citing some examples.
NOTE (1) If you enter the wrong value, press the CE button and then enter the correct value.
If you have pressed the Enter button, repeat step (1) of the previous page, and then enter
the correct value.
(2) When setting the two or more of three run conditions (SPEED, TIME, and TEMP), you do not
have to press the Enter button after each setting. You can store the setting by pressing the
desired item.
(3) If the system is running in (HOLD) and you want to set it to shut down at a future time, enter a
new time setting while the instrument is in operation; enter the sum of the time elapsed plus
the time remaining. If, for example, this machine has run continuously for five minutes and you
want to stop it one and a half minutes later, press the TIME area, then enter
.
6
3 0
2-2-1 Setting Run Conditions
: /-