Hitachi CR21N, Instruction Manual

Page: 36 / 112

2-21
Step Touch panel operation Screen displays and notes
4 Enter run parameters as
follows:
a) Press the area of the
item which you want to
change. Using the
on-screen keypad, enter
the run parameters (see
section 2-2-1).
b) After entering the run
parameters, press the
OK button.
Entering the numeric
values for SPEED,
TIME, TEMP, ACCEL,
and DECEL (or DECEL
SLOPE) is necessary.
If you do not enter the
numeric values for them,
The field on which you
do not enter the numeric
value turns red.
If you enter the wrong
numeric values for them,
The field on which you
enter the wrong numeric
value turns red.
(If you do not enter the numeric value for ACCEL, the following
screen appears.)
Example:
SPEED:7,500 rpm
TIME:HOLD
TEMP:25
o
C
ACCEL:9 / DECEL:9
ROTOR:R22A4
RCF:6420
SAMPLE HEIGHT:0
g.sec:-----
REMARK:hitachi koki
a) The on-screen
keypad appears.
OK button
￮
Be sure to enter numeric values for SPEED, TIME, TEMP,
ACCEL, and DECEL (or DECEL SLOPE).
（
For a programmed operation, it is not necessary to select a
rotor name, and enter remarks, and enter numeric values
for RCF, SAMPLE HEIGHT, and g.sec.
）
￮
If you do not enter a numeric value for SPEED, you can not
select ROTOR
（  ）
.
￮
If you do not select a rotor name, you can not enter numeric
values for RCF
（

）
and g.sec
（

）
.
2-3-1 Programmed Operation
b) The screen for
displaying the run
parameters appears.





