Hitachi CR21N, Instruction Manual

Page: 66 / 112

2-51
2-6-3 Customizing the Settings
In the MENU screen, press the Customize icon. Then the CUSTOM screen showing the six
functions is displayed as shown in Fig. 2-6-3.
2-6-3 Customizing the Settings
You can customize the settings in the Run screen and the settings in the CUSTOM
screen such as the stop signal, sound volume and backlight.
Fig. 2-6-3 CUSTOM Screen
Function Icon Description
Zoom
The display in the Run screen can be zoomed in (see
Section 2-6-3 (1)).
Stop signal
The rotor stop signal can be selected from six kinds of
sound including five tunes and electric beep (see Section
2-6-3 (2) ).
Volume
The volume of the stop signal can be adjusted (see
Section 2-6-3 (3)).
Brightness
The brightness of the screen can be adjusted (see
Section 2-6-3 (4)).
Pre-cool Pre-cool can be selected (see Section 2-6-3 (5)).
Auto standby
Auto standby mode can be selected (see Section 2-6-3
(6)).
The functions of each icon in the CUSTOM screen are described in the table below.
Press the desired icon. Then the corresponding item is displayed. After setting, press the
tab of the desired screen.
Tab of each screen