Hitachi CR21N, Instruction Manual

Page: 54 / 112

2-39
Step Touch panel operation Screen displays and notes
6 Press the x button,
and then the Run screen
reappears.
○
“--:--” is displayed in the lower part of the TIME area by
pressing Enter button (The elapsed time is displayed in the
upper part of the TIME area.)
○
The centrifuge starts deceleration when the current status
of the g.sec matches the specified setting of the g.sec, and
the current status of the g.sec shows the total value until
the rotor stops.
○
Set the run time in order to clear the operation of the g.sec
setting.
●
The Run screen
appears.
2-3-4 Displaying and Setting g.sec