Hitachi 3080 G1, Hardware Reference Manual

Page: 112 / 138

• 192.0.2.200/24 eth1 (cluster IP)
• 192.0.2.2/24 eth1 (testhost private IP)
• 192.168.4.120/24 eth0 (testhost external IP, which might vary)
When you run the nas-preconfig script, it reconfigures the server to the
previous settings. This step allows the SMU to recognize the server as the
same and allows it to be managed. Reconfigured settings:
• IP addresses for Ethernet ports 0 and 1
• Gateway
• Domain name
• Host name
On the replacement server:
Procedure
1. Log in to the server.
2. Run the nas-preconfig script.
3. Reboot if you are instructed to by the script.
4. Log in to the SMU using one of the IP addresses you obtained.
5. Use a KVM (keyboard, video, and mouse) or a serial cable to connect to
the serial port on the server.
Alternatively, you can connect by way of SSH using the following
settings:
• 115,200 b/s
• 8 data bits
• 1 stop bit
• No parity
• No flow control
• VT100 emulation
6. Log in as
root
(default password:
nasadmin
), and enter
ssc localhost
to access the BALI level command prompt.
7. Enter
evs list
to obtain the IP configuration for the server.
8. Using a supported browser, launch the Web Manager (SMU GUI) using
either of the IP addresses acquired from the EVS list output.
9. Click Yes , and log in as
admin
(default password:
nasadmin
).
10. Verify and, if necessary, convert the new server to the model profile
required.
This step requires a separate process, training, and license keys. Contact
Hitachi Data Systems Support Center if the incorrect model arrives for
replacement.
11. Navigate to Home > SMU Administration > Upgrade SMU to verify
and, if necessary, upgrade the embedded SMU to the latest SMU release.
12. Navigate to Home > Server Settings > Firmware Package
Management to verify and, if necessary, upgrade the new server to the
latest SU release.
112 Server replacement procedures
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference