Hitachi 3080 G1 Hardware Reference Manual Download

Page: 92 / 138

If this page does appear, click

Migrate an EVS from one node to

another within the cluster

to display the main EVS Migration page.

If the SMU is managing one cluster and no standalone servers, the main
EVS Migration page appears:

Migrate the EVSs between the cluster nodes until the preferred mapping

has been defined. The current mapping is displayed in the Current EVS

Mappings column of the EVS Mappings section of the page.

Save the current EVS-to-cluster node mapping by clicking

Save current

as preferred

in the EVS Mappings section.

Migrate EVSs as required:
• To migrate all EVSs between cluster nodes:

a. Select Migrate all EVS from

cluster node

___

to cluster node

___.

Hard disk replacement

Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference

Summary of Contents for 3080 G1











































































































































Search results

Summary of Contents for 3080 G1

Reviews:

Related manuals for 3080 G1

Brands by name

Popular brands

Hitachi 3080 G1, Hardware Reference Manual

Search results

Summary of Contents for 3080 G1

Reviews:

Related manuals for 3080 G1

Brands by name

Popular brands