Hitachi 3080 G1 Hardware Reference Manual Download Page 71

Page: 71 / 138

Rebooting or shutting down a cluster

Procedure

Using Web Manager, log in and select

Reboot/Shutdown

from the

Server Settings

page to display the Restart, Reboot and Shutdown

page. Note that the page has different options depending on the

configuration of your system.

Click the button for the action you want to perform as described next:

Option

Action

Restarting

File Serving

•

To restart all file serving EVSs on a single node, select the

Restart on node

option, use the drop-down list to select a node, and then click

restart.

•

To restart all file serving EVSs on all cluster nodes, select the

Restart on all

nodes

option and then click

restart.

Stop File

Serving

•

To stop all file serving EVSs on a single node, select the

Stop file serving

on node

option, use the drop-down list to select a node and then click

stop.

•

To stop all file serving EVSs on all cluster nodes, select the

Stop file

serving on all nodes

option and then click

stop

Reboot

•

To reboot a single node, select the

Reboot node

option, use the drop-down

list to select a node, and then click

reboot

•

To reboot all cluster nodes, select the

Reboot all nodes

option and then

click

reboot

Note:

Clicking Reboot stops all file serving EVSs on the selected

node or all cluster nodes, then reboots the node/nodes. Rebooting
may take up to five minutes.

Rebooting, shutting down, and powering off

Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference

Summary of Contents for 3080 G1











































































































































Search results

Summary of Contents for 3080 G1

Reviews:

Related manuals for 3080 G1

Brands by name

Popular brands

Hitachi 3080 G1, Hardware Reference Manual

Search results

Summary of Contents for 3080 G1

Reviews:

Related manuals for 3080 G1

Brands by name

Popular brands