Hitachi Koki 52, User Manual

Page: 203 / 207

7-9
3. Function Combination Matrix
Chapt
e
r 7
M
isce
ll
ane
o
us
Conditions for Combined Functions
❍
: The combination is possible.
●
: Either of the functions which is set first takes precedence.
✕
: Either of the functions which is set last takes precedence.
: One of the functions must be canceled before a copy cycle can be initiated.
▲
: The combination is disabled in 1 2 Mode and the function set first takes precedence.
A : The combination is impossible if the Paper Size is input by custom size and the function set first
takes precedence.
B : The combination is only available for the extra copies.
When OHP Interleaving is selected, 2 2[2-in-1] or 2 2[4-in-1] Mode will be automatically
changed to 1 1[2-in-1] or 1 1 [4-in-1] Mode.
C : The combination can make OHP copies.
D : Shift-for-Margin and Half-Fold cannot be combined. (The function set first takes precedence.)
E : The Mixed Original Detection mode is valid regardless of whether Mixed Orig. Detect is turned ON
or OFF.
F : The Mixed Original Detection mode is valid for Auto Detect and not valid for Size Input regardless
of whether Mixed Orig. Detect is turned ON or OFF.
G : Booklet Creation and Back Cover cannot be combined. (Booklet Creation takes precedence.)
H : The zoom ration is automatically changed to Full Size.
I : No zoom ratios can be stored in memory in the Interrupt mode.
J : The function set last takes precedence. (Center Staple is automatically selected.)
K : Auto Size is automatically selected.
L : 2-Point Side Staple is automatically selected.
M : The functions cannot be combined only for Separation. (The function set first takes precedence.)
N : When the copier is equipped with an FN-3, the function set last takes precedence (and Center Staple
is automatically selected).
P : The combination is not possible only if Auto Paper is used, and Staple is automatically canceled.
(The combination becomes possible when it is further combined with Z-Fold.)
Q : The combination is not possible only if Auto Paper is used with an FN-3 installed, and Staple is
automatically canceled. (The combination becomes possible when it is further combined with Z-
Fold.)
R : The combination is not possible only if the finished size of Z-Fold differs from the size of the cover
or interleaf. The function set first takes precedence. (Neither the cover nor interleaf can be folded in
Z-fold.)
- : Has no bearing
Ot
he
rs
ADF/SADF Mode
● ● ● ● ● ❍
-
● ● ● ● ❍ ● ❍ ❍ ❍ ❍ ● ❍ ❍ ● ❍
-
● ●
Interrupt
❍ ❍ ❍ ❍ ❍ ❍ ❍ ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
-
❍ ●
Reserve
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ●
Orig. on the Glass
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
-
❍
Image Memory Input - - - - - - - - - - -
❍
- - - - -
❍ ❍ ❍ ❍
×
❍
-
❍
▼
▼ ▼
▼ ▼