Hioki MR8904, Instruction Manual

Page: 53 / 72

5.7 Window Menu Commands
49
Toolbar
CAN Definition Data File Settings window
Menu bar
Menu Explanation
File
New Displays a new CAN Definition Data File Settings window.
Open
Loads data from a previously created CAN definition data file (.CDF file) and
displays it in a CAN Definition Data File Settings window.
Convert DBC File and
Open
Converts an existing CANdb file (.DBC file) into a CAN definition data file and
displays it in a CAN Definition Data File Settings window.
Close Closes the currently displayed CAN Definition Data File Settings window.
Save
Saves the contents of the currently displayed CAN Definition Data File Set-
tings window to the corresponding file.
Save As
Saves the contents of the currently displayed CAN Definition Data File Set-
tings window to a new file.
Print No function
Print Preview No function
Print Setup
Configures the printer used to print the Condition Settings window’s register
list, communications condition settings, channel assign list, and send list.
Exit Exits the MR8904 CAN Editor.
Edit Modify Password Sets the password required when opening the CAN definition data file.
View
Toolbar Toggles the toolbar display on and off.
Status Bar Toggles the status bar display on and off.
Window
Cascade
When the CAN Definition Data File Settings window and Condition Settings
window are open at the same time, displays them in a cascading manner.
Tile
When the CAN Definition Data File Settings window and Condition Settings
window are open at the same time, arranges them side by side.
Help
About MR8904 CAN

Editor
Displays version information for the MR8904 CAN Editor.
Create a new CAN definition data file.
Open a CAN definition
data file.
Create a new setting conditions file.
Open a setting conditions file.
From the left, CAN definition data field manipulation:
ADD : Add
EDIT : Edit
DEL : Delete
DUP : Duplicate
Save the displayed content to a new file.
Save the displayed content.
Select the connected device.