Hioki MR8904, Instruction Manual

Page: 46 / 72

5.4 Creating Condition Settings Files
42
Finally, create an MR8904 send list (which will serve as the transmission condition settings). To do so,
register frames to be sent to the CAN bus to which the unit is connected along with the timing with which
they are to be sent to the [MR8904 Send List] .
Configuring transmission (creating an MR8904 Send list)
1
Click the [Add] button at the bottom of
the [MR8904 Send List] .
Clicking an item registered in the list
will cause the [Insert] , [Edit] , [Del] ,
and [Dup] buttons to activate.
To edit the [MR8904 Send List]
[Insert] : Inserts a transmission setting into the selected item.
[Edit] : Edits the settings for the selected item.
[Del] , [Dup] :
Deletes or duplicates the selected item.

To delete or duplicate multiple items, click the button after selecting the target items using
any of the following methods:
• Click the first line in the target range and drag the mouse to the last line.
• Click the first and then the last line in the target range while pressing the
Shift key on the
keyboard.
• Click the target lines while pressing the Ctrl key on the keyboard.
The [Send ID Setting] dialog box will be displayed.
2
Configure the settings.
(Continues on next page.)