Hioki MR8904, Instruction Manual

Page: 15 / 72

3.1 Installing and Removing the MR8904 into and from a Memory HiCorder
11
Before connecting the device, be sure to read "When Installing and Removing the MR8904 into and from
the Memory HiCorder" (p.4), which describes how to install a newly purchased MR8904 into a Memory
HiCorder and how to switch between it and other input modules.
(Example: MR8875)
Required items: Phillips head screwdriver (No.1)
Connections
Chapter 3
3.1 Installing and Removing the MR8904 into
and from a Memory HiCorder
MR8904
Mounting
screws
1
Turn the Memory HiCorder POWER switch
off and unplug the AC adapter and any
measurement cords.
2
With attention to the orientation of the
MR8904, insert it firmly all the way in.
3
Using the Phillips screwdriver, tighten the
two MR8904 mounting screws.
To remove the MR8904, turn off the Memory
HiCorder, disconnect any cords that are connected
to the MR8904, and remove the device by revers-
ing the procedure described above.
Grip
Grip