Hioki LR8400-20, Instruction Manual

Page: 107 / 300

4.3 Marking Waveforms and Searching Marks (Search Function)
95
3
Chapt
e
r
4 Observing
Me
asurement
s and
D
a
ta
4
You can insert up to 100 event marks at any point while measuring,
to help find them later.
See:
"Searching Event Marks" (p. 99)
Event marks can be applied by the following methods.
„
Press START while measuring
„
Press the on-screen [Make Mark] button.
„
Apply a signal to the EXT TRIG terminal
„
When a warning occurs
Use this procedure to insert event marks while viewing data on the Waveform/Numerical
Value screen during measurement.
Press
START to apply a mark.
Event marks are numbered in the sequence they are inserted.
Marks can also be applied with the following procedures.
4.3 Marking Waveforms and Searching Marks
(Search Function)
1 2 3
Inserting Event Marks While Viewing Waveforms
Select [Event] .
1
The event settings are displayed.
3
Apply
Select [Gauge+Wave] .
Move to [Make Mark].
Press to insert an event
mark.
Event numbers appear on the
waveform displayed when you
select
[Make Mark] .
2
Select [Channel] .
2
3