Hioki LR8400-20, Instruction Manual

Page: 73 / 300

3.3 Input Channel Settings
61
3
3
Chapt
e
r
3 Sett
ings
Enable this channel setting for humidity measurement with the optional Z2000 Humidity
Sensor. Make these settings on the
[CH] screen.
See: "Key Setting Procedure" (p .55)
Humidity Measurement Settings
1
Select the input unit ( UNIT1 to 4 ) and channel
( 1-1 to 4-15 ), and check the box to enable the
channel.
2
Select [Humid] .
1
*
The range is fixed at [100% f.s.] .
2 *
: On
: Off
When a measured value far exceeds the range limit (range label)
"OVER" or "-OVER" is displayed in place of numerical/cursor values, and the following values
are applied to calculations and data storage.
Input type Input range +OVER value -OVER value
Humidity 100%RH 3276.7 -3276.8