Hioki DT4252 Instruction Manual Download Page 76

Page: 76 / 105

Communicating with PC

Attaching the communication adapter to the instrument

Communication
port

Communication
adapter

USB cable

Attach the
communication
adapter.

Connect the
USB cable to the
communication
adapter.

• Connect the cables, being careful to orient each cable correctly.

• During communication,

appears in the display.

• When

is lit, the operation keys of the instrument is

disabled.

• During communication, do not disconnect the USB cable.

Disconnecting the cable stops the communication. In that case,
a warning is displayed by the PC software. Connect the cable
again.

• It is possible to use the instrument while the communication

adapter is attached, however, the communication adapter is
excluded from the drop-proof.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for DT4252










































































































Search results

Summary of Contents for DT4252

Reviews:

Related manuals for DT4252

Brands by name

Popular brands

Hioki DT4252, Instruction Manual

Search results

Summary of Contents for DT4252

Reviews:

Related manuals for DT4252

Brands by name

Popular brands