Hioki DT4252 Instruction Manual Download

Page: 31 / 105

Inserting/Replacing Batteries

Have the following items
available and ready.

• Phillips screwdriver

• LR03 Alkaline battery × 4

Remove the test leads from
the instrument.

Set the rotary switch to OFF.

Using a Phillips screwdriver,
remove the screw
(1 location) from the battery
cover on the rear of the
instrument.

Remove the battery cover.

Remove all of the old
batteries.

Insert 4 new batteries (LR03),
being careful to the battery
polarity.

Reattach the battery cover.

Secure the cover with the
screw.

(Only the DT4252, DT4253,
DT4255, and DT4256)
After the battery cover is removed,
the fuse can be seen. When
replacing the fuse, see “6.4
Replacing Fuses” (p. 100).

Screw

Rear

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for DT4252










































































































Search results

Summary of Contents for DT4252

Reviews:

Related manuals for DT4252

Brands by name

Popular brands

Hioki DT4252, Instruction Manual

Search results

Summary of Contents for DT4252

Reviews:

Related manuals for DT4252

Brands by name

Popular brands