Hioki CM4002, Instruction Manual

Page: 56 / 104

48
Comparator Function (COMP)
2.6 Comparator Function (COMP)
When a measured value exceeds the threshold value, a buzzer will sound and the warning
backlight (p. 57) will light up. The buzzer sound can also be disabled. (p. 67)
The auto-range cannot be used when the comparator function is enabled.
1
Enable the comparator function.
2
Set the range (main readout).
Press.
(Pressing the key
again can disable
the function.)
200.0 A
6.000 mA 60.00 mA 600.0 mA
6.000 A 60.00 A
Confirm
COMP
will appear. 3
Set the threshold value (sub-readout).
Present
measured
value
The range is
displayed here
during the
range setting.
Threshold
value
Increases the value.
Decreases the value.
REF
Confirm
Holding down the key increases or
decreases the value continuously.
HIOKI CM4002A961-02