manualshive.com logo in svg

Hioki BT3554-50, Instruction Manual, Page: 154 / 188

Share
Download
Hioki BT3554-50 Instruction Manual Download Page 154

140

Repair, Inspection, and Cleaning

Replacement parts and service lives

The performance of some parts used in the instrument may degrade 

during the course of extended use. To ensure your ability to use 

the instrument into the indefinite future, Hioki recommends regular 

replacement of these parts. Please contact your authorized Hioki 

distributor or reseller when you need to do so. Service life varies 

with the operating environment and frequency of use. Please note 

that performance is not necessarily guaranteed for the duration of 

the recommended replacement cycle.

Part name

Recommended 

replacement 

cycle

Remarks and conditions

Backup battery

About 10 

years

Replace it if the time and 

date are completely wrong 

when the instrument is 

turned on.

HIOKI BT3554F961-00

HIOKI BT3554F961-00

Summary of Contents for BT3554-50





























































































































































































Reviews:

No comments