Hioki 3804-50, Instruction Manual, Page: 97 / 130

29 3.3 Hold Functions
索引
4
3
2
1
7
6
5
10
9
8
To cancel the trigger hold function, press and hold
the
REC/HOLD key.
3.3.2 Refresh Hold Function
The refresh hold function locks the display value automatically
once the measurement value stabilizes. As the display value
remains locked even if you remove the test leads from the test
subject, this function is useful when you are measuring in loca-
tions where it is difficult to see the display value or when you are
using both hands to take measurements.
1.
Set the threshold value (the amount of change once
the display has stabilized) of the refresh hold function.
❖
(40 page)
2.
Press the REC/HOLD key to set the instrument to
wait for the trigger.
3.
Connect the test lead to the test subject. Once the
display value stabilizes, " " lights, a buzzer
sounds and the display is locked.
HOLD lights
HOLD flashes
→
Lights
The bar graph conforms with the displayed hold
value.
HOLD
HOLD flashing
Wait for the trigger