Hioki 3804-50, Instruction Manual, Page: 96 / 130

3.2 Manual Range Function
28
Press the RANGE key to set the manual range function. Each
time the key is pressed the range increases, and the position of
the decimal point changes. Use this function when you know the
strength of the input signal.
To change to auto range, hold down the
RANGE key.
3.3.1 Trigger Hold Function
Fix a measurement value for the trigger hold function before
pressing the
REC/HOLD key.
1.
Turn the refresh hold function off.
❖
(40 page)
2.
Press the REC/HOLD key during measurement to
lock the displayed value.
3.
To update and lock the displayed value again,
press the
REC/HOLD key again.
3.2 Manual Range Function
• When using the continuity check function, man-
ual range is the initial setting. When using except
for the continuity check function, Auto range is
the initial setting.
• Auto range is not available for diode check A
function.
AUTO OFF
3.3 Hold Functions