Hioki 3804-50, Instruction Manual, Page: 93 / 130

25
2.7 Capacitance Measurement
索引
4
3
2
1
7
6
5
10
9
8
2.7 Capacitance Measurement
Never apply voltage to the test leads. Doing
so may damage the instrument and result in
personal injury. To avoid electrical accidents,
remove power from the circuit before mea-
suring.
1.
Set the function switch.
2.
If you want to change the
range, press the
RANGE
key.
(Normally, manual range is
used.)
❖
(28 page)
3.
Connect the test leads to
the test terminals.
4.
Connect the test leads to
the object being tested.
5.
Read the value displayed.
This instrument measures capac-
itance by the charge-discharge
method. This instrument mea-
sures capacitance by the charge-
discharge method. Due to charg-
ing times, the 9.999 mF range
can take several tens of seconds
before the measured value is dis-
played.
( AUTO off)
<Example>
Red
Black