Hioki 3286-20, Instruction Manual, Page: 31 / 78

14
―――――――――――――――――――――――――――
Chapter 2 Measurement Procedure
――――――――――――――――――――――――
WARNING
Due to the risk of electric shock, connect the
yellow cord not used for measurement to the
part to which the black cord connects to
prevent the clip from accidentally touching
anyone.
NOTE
2.2 Connections
[To initialize the saved contents]
Holding down the RANGE key when powering on
initializes all the saved contents. (SETUP Function,
measurement condition save Function)
Before conducting measurement, check the
connections.
Be sure to connect the voltage clip to the part
bearing the exposure voltage.