Hioki 3285-20, Instruction Manual, Page: 80 / 85

59 _______________________________________________________
5.1 Cleaning
_______________________________________________________
Chapter 5
Maintenance
and Service
5.1 Cleaning
5.2 After service
To clean the instrument, wipe it gently with a soft cloth
moistened with water or mild detergent. Never use solvents
such as benzene, alcohol, acetone, ether, ketones, thinners
or gasoline, as they can deform and discolor the case.
Measurements are degraded by dirt on the mating surfaces
of the clamp-on sensor, so keep the surfaces clean by gently
wiping with a soft cloth.
To avoid corrosion from battery leakage, remove the batteries
from the instrument if it is to be stored for a long time.
The minimum stocking period for replacement parts is five
years after end of production.
If damage is suspected, check the "5.3 Troubleshooting"
section before contacting your dealer or Hioki
representative.
When sending the instrument for repair, remove the
batteries and pack carefully to prevent damage in transit.
Include cushioning material so the instrument cannot move
within the package. Be sure to include details of the
problem. Hioki cannot be responsible for damage that
occurs during shipment.