44
_______________________________________________________
3.4 Storing Values in Memory (Recording Function REC)
_______________________________________________________
If the recording function is activated and
Instantaneous value (no annunciator) selected after
you activate PEAK mode with the
SLOW/PEAK/Hz
button, you can see the fluctuation of the peak.
2. Display of Elapsed Time
When you press the
MAX/MIN
button to activate
the recording function, the bar graph segments flash
and the elapsed time appears.
When "
min
" is shown in the right-hand corner of
the bar graph, each segment of the bar graph
corresponds to one minute.
Every time one minute elapses, one segment of the
flashing bar graph goes on. When all segments on
the bar graph go on, the elapsed time is 30 minutes.
When the elapsed time exceeds 30 minutes, one
segment of the flashing bar graph goes off every
time one minute elapses.
When the segments left of a flashing segment
remain on: the number of "on" segments represents
the elapsed time (0 ~ 29).
The illustration below shows when 20 minutes have
elapsed:
Summary of Contents for 3285-20
Page 5: ......