Hioki 3285-20, Instruction Manual, Page: 66 / 85

45 _______________________________________________________
3.4 Storing Values in Memory (Recording Function REC)
_______________________________________________________
When the segments right of a flashing segment
remain on: the number of "off" segments (+30)
represents the elapsed time (30 ~ 59).
The illustration below shows when 50 minutes have
elapsed:
When digital display switches the average value
(AVE) to a instantaneous value when you press the
MAX/MIN
button, the right corner of the bar graph
indicates hours. In this mode, each segment of the
bar graph corresponds to one hour. The way to read
the bar graph here is similar to reading it in
minutes. When all bar graph segments remain on,
the elapsed time is 29 hours.
The illustration below shows when one hour, 40
minutes have elapsed.
3. Deactivation of Recording Function
Pressing the HOLD button deactivates the
recording function.
HOLD
goes on, REC stops
flashing and goes on, and the elapsed time stops
incrementing.
While the recording function is being deactivated,
data is not updated, even if the clamp sensor is
disconnected from the conductor.
Pressing the
HOLD button again cancels HOLD
display and activates the recording function again,
with
REC
flashing again.