ORIGINAL OPERATING INSTRUCTIONS
DAG 500‑D angle grinder
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
Page
1 General information
1
2 Description
2
3 Consumables
4
4 Technical data
5
5 Safety instructions
6
6 Before use
10
7 Operation
11
8 Care and maintenance
12
9 Troubleshooting
13
10 Disposal
13
11 Manufacturer’s warranty - tools
13
1
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “the
power tool” always refers to the DAG 500-D angle grinder.
Operating controls and components
1
@
Ventilation slots
;
Hold-to-run switch
=
Side handle
%
Spindle lockbutton
&
Guard release button
(
Spindle
)
Guard
+
Clamping flange
§
Cutting disc / grinding disc (not supplied)
/
Clamping nuts
:
Wrench
·
Safety release
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
Warning: hot
surface
en
1
Printed: 09.12.2013 | Doc-Nr: PUB / 5164435 / 000 / 00