![background image](http://html1.mh-extra.com/html/hilti/bx-3-me/bx-3-me_operating-manual_2135885019.webp)
English
17
6.5 Removing nails from the fastening tool
6.5.1 Removing a nail when in magazine mode
1. Pull the nail pusher down until it engages.
2. Slide the nail downwards out of the magazine.
3. Hold the nail pusher securely and press the nail pusher release button.
4. Guide the nail pusher back to its original position.
6.5.2 Removing a nail when in single-fastener mode
▶
To remove a nail that has been inserted into the fastener guide, proceed in the same
way as for removing a jammed nail (see → page 17).
6.6 Jammed nails
Individual nails may get stuck in the fastener guide. You can remove jammed nails from
the fastener guide with the aid of the X-NP drift punch set. Accessories are available
from your
Hilti
Center or can be ordered online at
www.hilti.com
.
WARNING
There is a risk of injury and damage to the fastening tool.
Use of unsuitable
items instead of the recommended genuine
Hilti
accessories may result in injury or
damage to the fastening tool.
▶
To release a jammed nail, use only the recommended drift punch set.
CAUTION
Risk of injury by flying parts!
Triggering the tool (attempting to drive a fastener)
when foreign objects are present in the area around the fastener guide, or when a
fastener is jammed in the fastener guide, may lead to injury caused by flying objects
or fragments.
▶
Never attempt to remedy tool malfunctions by continuing to trigger the tool.
6.6.1 Releasing a jammed nail
1. Remove the fastener guide. → page 11
2. Fit the fastener guide into the supporting sleeve from the drift punch set.
3. Use the drift punch and a hammer to tap the jammed nail out of the fastener guide.
4. Insert the fastener guide. → page 12
7 Care and maintenance
7.1 Care and maintenance of cordless tools
WARNING
Risk of electric shock!
Attempting care and maintenance with the battery fitted in
the tool can lead to severe injury and burns.
▶
Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents
containing silicone as these can attack the plastic parts.
Printed: 04.10.2017 | Doc-Nr: PUB / 5377202 / 000 / 01
Summary of Contents for BX 3-ME
Page 1: ...BX 3 ME English Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 2: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 9: ...English 7 3 Description 3 1 Product overview Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 23: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...