![background image](http://html1.mh-extra.com/html/hilti/bx-3-me/bx-3-me_operating-manual_2135885015.webp)
English
13
5.7 Loading the fastening tool with nails
5.7.1 Loading for magazine operation
WARNING
Risk of crushing!
Allowing the nail pusher to snap back under spring pressure may
result in finger injuries and cause damage to the fastening tool.
▶
When pulling the nail pusher down, take care to ensure that it engages securely.
Do not allow the nail pusher to jump back under spring pressure.
1. Pull the nail pusher down until it engages.
2. Slide the nail strip(s) into the magazine (a maximum of 2 strips of 10 nails per strip).
3. Hold the nail pusher securely and press the nail pusher release mechanism.
4. Guide the nail pusher back.
5.7.2 Loading for single-fastener mode
CAUTION
Crush hazard!
If it is allowed to snap back, the nail pusher can cause injuries and
damage the fastening tool.
▶
When you pull down the nail pusher make sure it engages securely. Do not allow
the nail pusher to snap back.
1. Pull the nail pusher down until it engages.
Printed: 04.10.2017 | Doc-Nr: PUB / 5377202 / 000 / 01
Summary of Contents for BX 3-ME
Page 1: ...BX 3 ME English Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 2: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 9: ...English 7 3 Description 3 1 Product overview Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 23: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...