![background image](http://html1.mh-extra.com/html/hilti/bx-3-me/bx-3-me_operating-manual_2135885013.webp)
English
11
1. Check that the contacts on the battery and on the tool are free of foreign matter.
2. Insert the battery, making sure that it engages with an audible click.
◁
When you insert the battery the charge status LEDs show briefly.
CAUTION
A falling battery presents a hazard.
If the battery is not secured correctly it may
drop out and fall while the work is in progress.
▶
Always check that the battery is securely seated.
3. Check that the battery is securely seated in the fastening tool.
5.3 Removing the battery
1. Switch off the fastening tool. → page 15
2. Press and hold down the two release buttons.
3. Pull the battery to the rear and out of the device.
5.4 Removing the fastener guide
1. Switch off the fastening tool. → page 15
2. Remove the battery. → page 11
3. Pull the nail pusher down until it engages.
4. Unload the magazine. → page 17
5. Slide the fastener guide locking catch as far as it will go in the direction of the arrow.
◁
The fastener guide will be released.
6. Remove the fastener guide.
Printed: 04.10.2017 | Doc-Nr: PUB / 5377202 / 000 / 01
Summary of Contents for BX 3-ME
Page 1: ...BX 3 ME English Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 2: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 9: ...English 7 3 Description 3 1 Product overview Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...
Page 23: ...Printed 04 10 2017 Doc Nr PUB 5377202 000 01 ...