![background image](http://html.mh-extra.com/html/hilti/ag-500-a22/ag-500-a22_operators-manual_2135596011.webp)
9
@
Guard release button
;
Spindle lockbutton
=
Air vents
%
Release button with additional function
(charge status display activation)
&
Battery
(
Switch-on interlock release button
)
On/off switch
+
Vibration-absorbing side handle
§
Spindle
/
Standard guard
:
Clamping flange
∙
Cutting disc / grinding disc
$
Clamping nut
£
Kwik lock
clamping nut (optional)
|
Wrench
3.2 Intended use
The product described is a hand-held cordless angle grinder. It is designed to be used for cutting and
grinding metals and mineral materials, and for wire brushing without use of water. It can be used only for dry
grinding / cutting.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard (optional accessory).
• A dust removal hood together with a suitable
Hilti
vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
▶
Use only
Hilti
Liion batteries of the B 22 series with this product.
▶
Use only
Hilti
battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
You can find other system products approved for your product at your local
Hilti
Center or online at:
www.hilti.com
3.4 Temperature-dependent motor protection
The temperature-dependent motor protection system monitors current input and motor temperature and
thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure, the power tool’s performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
3.5 Guard with front cover
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
Printed: 26.01.2017 | Doc-Nr: PUB / 5292879 / 000 / 00
Printed: 26.01.2017 | Doc-Nr: PUB / 5292879 / 000 / 01
Summary of Contents for AG 500-A22
Page 2: ...Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 8: ...6 Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 9: ...7 Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 23: ...Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...