![background image](http://html.mh-extra.com/html/hilti/ag-500-a22/ag-500-a22_operators-manual_2135596018.webp)
16
CAUTION
Risk of breakage and irreparable damage.
If the spindle lockbutton is pressed while the spindle is
rotating, this may cause the accessory tool to work loose or detach from the power tool.
▶
Press the spindle lockbutton only when the spindle has stopped rotating.
2. Press the spindle lockbutton and hold it in this position.
3. Release the clamping nut by gripping it with the wrench and turning the nut counterclockwise.
4. Release the spindle lockbutton and remove the accessory tool.
6.7.3 Fitting an accessory tool secured with a Kwik lock nut
CAUTION
Risk of breakage.
Heavy wear (abrasion) may cause the
Kwik lock
nut to break.
▶
When working with the power tool, make sure that the
Kwik lock
nut doesn’t come into contact
with the working surface.
▶
Do not use a damaged
Kwik lock
nut.
Note
The optional
Kwik lock
nut can be used instead of the standard clamping nut. Accessory tools (discs
etc.) can then be changed without need for additional tools (keyless system).
1. Remove the battery. → page 13
2. Clean the clamping flange and the quick-release clamping nut.
3. Fit the clamping flange onto the drive spindle.
4. Fit the accessory tool.
5. Screw on the
Kwik lock
nut until it is seated against the accessory tool.
◁
The name
Kwik lock
should be visible when the nut is screwed on.
6. Press the spindle lockbutton and hold it in this position.
7. Turn the accessory tool firmly by hand in a clockwise direction until the
Kwik lock
nut is tightened
securely and then release the spindle lockbutton.
6.7.4 Removing an accessory tool secured with a Kwik lock nut
1. Remove the battery. → page 13
CAUTION
Risk of breakage and irreparable damage.
If the spindle lockbutton is pressed while the spindle is
rotating, this may cause the accessory tool to work loose or detach from the power tool.
▶
Press the spindle lockbutton only when the spindle has stopped rotating.
2. Press the spindle lockbutton and hold it in this position.
3. Release the
Kwik lock
nut by turning it counterclockwise by hand.
Printed: 26.01.2017 | Doc-Nr: PUB / 5292879 / 000 / 00
Printed: 26.01.2017 | Doc-Nr: PUB / 5292879 / 000 / 01
Summary of Contents for AG 500-A22
Page 2: ...Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 8: ...6 Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 9: ...7 Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...
Page 23: ...Printed 26 01 2017 Doc Nr PUB 5292879 000 00 Printed 26 01 2017 Doc Nr PUB 5292879 000 01 ...