HIKVISION Pyronix EURO 46 V10, Programming Manual

Page: 8 / 64

8
EURO 46 V10 Programming Manual
Engineer Menu - Options
Inhibit Fire / HU (Hold Up)
This menu has a single sub-menu that simply allows you to toggle between ‘Yes [1]’ and ‘No [0]’, in
order to Inhibit a fire or Hold Up alarm while in engineer’s mode/menu. For example, you may wish to
inhibit smoke detectors while in the engineers menu so that you can work on them.
Set Date and Time?
All log entries and the system display include the date and time, so it is vital that the correct date and
time is programmed. This may be also programmed in the Master Manager mode.
PLEASE NOTE:
Removing the mains power and disconnecting the battery will reset the time and
date information.
Change Year
For the year 2017, enter 17.
Change Month
For March, enter 03.
Change Day
For 31st, enter 31.
Change Hours
Use 24 hour clock format. For 8pm enter 20:00.
Change Minutes
For 7:30, enter 30.
DST (Summer Time) Adjust
If activated this option will automatically change one hour ahead and backward for the summer and
winter time.
Wireless Device Control?
This function learns or deletes all wireless inputs, bells and arming stations to the EURO 46 V10.
PLEASE NOTE:
Keyfobs are learnt and programmed from the Master Manager Menu.
Control Inputs?
Learn Devices?
This menu starts the procedure of learning wireless inputs onto the Euro 46 V10.
Input
This menu chooses which input on the system is to be learned. ‘Learnt’ will be displayed if a device is
already learnt, or ‘Available’ if it is not.
Learning…
1. Open the wireless device.
2. Remove the plastic insulation to enable the battery.
3. If the device is not learnt, the
GREEN
and
RED
LEDs on the device will flash (alternating).