background image

DS-K1201 Fingerprint Card Reader 

 
 

User Manual 
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd.   
This manual is applied to fingerprint card reader. 

Device Name 

Model 

Fingerprint 
Card Reader 

DS-K1201AMF 
DS-K1201AEF 

It includes instructions on how to use the Product. The software embodied in the 
Product is governed by the user license agreement covering that Product. 
About this Manual 
The  Manual  includes  instructions  for  using  and  managing  the  product.  Pictures, 
charts,  images  and  all  other  information  hereinafter  are  for  description  and 
explanation  only.  The  information  contained  in  the  Manual  is  subject  to  change, 
without  notice,  due  to  firmware  updates  or  other  reasons.  Please  find  the  latest 
version in the company website (

http://overseas.hikvision.com/en/

).     

Trademarks 

and  other  Hikvision’s  trademarks  and  logos  are  the  properties  of 

Hikvision in various jurisdictions. Other trademarks and logos mentioned below are 
the properties of their respective owners. 
Disclaimer 
TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  THE  PRODUCT 
DESCRIBED,  WITH  ITS  HARDWARE,  SOFTWARE  AND  FIRMWARE,  IS  PROVIDED  “AS 
IS”,  WITH  ALL  FAULTS  AND  ERRORS,  AND  HIKVISION  MAKES  NO  WARRANTIES, 
EXPRESS  OR  IMPLIED,  INCLUDING  WITHOUT  LIMITATION,  MERCHANTABILITY, 
SATISFACTORY  QUALITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  AND 
NON-INFRINGEMENT  OF  THIRD  PARTY.  IN  NO  EVENT  WILL  HIKVISION,  ITS 
DIRECTORS,  OFFICERS,  EMPLOYEES,  OR  AGENTS  BE  LIABLE  TO  YOU  FOR  ANY 
SPECIAL,  CONSEQUENTIAL,  INCIDENTAL,  OR  INDIRECT  DAMAGES,  INCLUDING, 
AMONG  OTHERS,  DAMAGES  FOR  LOSS  OF  BUSINESS  PROFITS,  BUSINESS 
INTERRUPTION,  OR  LOSS  OF  DATA  OR  DOCUMENTATION,  IN  CONNECTION  WITH 
THE  USE  OF  THIS  PRODUCT,  EVEN  IF  HIKVISION  HAS  BEEN  ADVISED  OF  THE 
POSSIBILITY OF SUCH DAMAGES. 
REGARDING  TO  THE  PRODUCT  WITH  INTERNET  ACCESS,  THE  USE  OF  PRODUCT 
SHALL  BE  WHOLLY  AT  YOUR  OWN  RISKS.  HIKVISION  SHALL  NOT  TAKE  ANY 
RESPONSIBILITES  FOR  ABNORMAL  OPERATION,  PRIVACY  LEAKAGE  OR  OTHER 
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INFECTION, OR 
OTHER  INTERNET  SECURITY  RISKS;  HOWEVER,  HIKVISION  WILL  PROVIDE  TIMELY 
TECHNICAL SUPPORT IF REQUIRED.   

Summary of Contents for DS-K1201A Series
















Reviews: