DS-K1201 Fingerprint Card Reader
iv
documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection
point. For more information see:
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Use only power supplies listed in the user instructions:
Model
Manufacturer
Standard
DSA-12PFT-12FUK 120100 Dee Van Enterprise Co., Ltd. BS
DSA-12PFT-12FAU 120100 Dee Van Enterprise Co., Ltd. AS
DSA-12PFT-12FIN 120100 Dee Van Enterprise Co., Ltd. IS
DSA-12PFT-12FUS 120100 Dee Van Enterprise Co., Ltd. IEC
DSA-12PFT-12 FBZ 120100 Dee Van Enterprise Co., Ltd. NBR
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical
safety regulations, fire prevention regulations and other related regulations in
your local region.
Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may
cause over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install
or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
Warnings Follow
these safeguards
to prevent
serious injury or
death.
Cautions Follow
these precautions
to prevent
potential injury or
material damage.
