HIKVISION DS-96000NI-I16/H Series User Manual Download Page 137

Page: 137 / 188

Network Video Recorder User Manual

136

Ensure you have connected the device with queue management camera, and the camera is
online.

Go to System > Event > Smart Event.

Select a queue management camera from the camera list.

(Optional) Check Save VCA Picture to save the captured pictures of detection.

Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.

Set the linkage actions. Refer to Chapter 11.1 Configure Arming Schedule

Select the Arming Schedule tab.

Choose one day of a week and set the time segment. Up to eight time periods can be set within
each day.

Time periods shall not be repeated or overlapped.

Set Arming Schedule

Click Apply to save the settings.

Configure Alarm Linkage Actions.

Click Apply.

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands