HIKVISION DS-96000NI-I16/H Series User Manual Download Page 84

Page: 84 / 188

Network Video Recorder User Manual

Create Array

Enter the array name.

Select RAID Level as RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10 as required.

Select the physical disks to constitute array.

Required Number of HDD

RAID Level

Required Number of HDD

RAID 0

At least 2 HDDs.

RAID 1

At least 2 HDDs.

RAID 5

At least 3 HDDs.

RAID 6

At least 4 HDDs.

RAID 10

The number of HDD must be an even ranges from 4 to
16.

Click OK.

Optionally, the device will automatically initialize the created array. Go to Storage > RAID
Setup > Array view the information of created arrray.

Array List

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands